The Great Debate Which is better between a traditional guitar capo or a quick-change key-change capo?

  • Post comments:0 Comments
  • Reading time:7 mins read

The Great Debate: Which is better between a traditional guitar capo or a quick-change key-change capo?: a blog regarding the great guitar capo debate.

The two most common types of guitar capos are the traditional capo and the quick-change key-change capo. Each type of capo has advantages and disadvantages depending on the preference of each guitarist.

A traditional guitar capo is typically made out of metal and is shaped as an arm that will clip onto the headstock of a guitar. This type of capo is heavy duty, durable, and long lasting. On the other side of the spectrum, there are quick-change key change capos, like the G7th Performance Capo, that attach to a guitar’s fretboard either by a clamping action or by a spring action. The G7th Performance Capo also has rubber pads that come into contact with your strings to ensure no buzzing or deadening of tone. While this type of capo can be more compact than some traditional guitar-capos, it may not be as durable over time as some traditional models because it contains moving parts. However, it does have the advantage over many traditional models in that it can be moved from fret to fret very quickly (

Guitar Capos are used to change the key that a guitar is tuned to. Capos are one of the most popular guitar accessories of all time, and have been since the late 1800’s. Over time, two main types of capo have prevailed: the traditional capo and quick-change key-change capos. These two types of capo have been battling it out for guitar player’s favor for over a century. It could be argued that this battle will never end… but we’re going to try to put an end to this battle right now! We’re going to lay out the pros and cons of each capo style, and then let you make your own decision as to which is best.

Traditional Guitar Capos

The Traditional Guitar Capo is arguably the most commonly used type of capo today: it goes over your fingerboard on any fret you choose, clamps down in order to hold all six strings where you want them, and can be easily removed by loosening or tightening its rubber or spring grip. While simple in design, there are many different variations on this theme. Some clamp using screws; some using levers; some using springs; some using rubber bands; some even require no clamping at all!



Perhaps no other tool in the guitar player’s arsenal has as much controversy as the guitar capo. There is a great debate among players about whether to use a traditional capo or a quick-change key-change capo.

Many guitarists prefer the traditional style of capo because it works well and they are used to it. These types of players see no reason to change what they know works. However there is a new generation of guitarists who want a faster, more efficient way to play their instrument. They are discovering that changing keys on the fly during a performance opens up many new possibilities. With a quick-change key-change capo, an acoustic guitarist can easily and quickly change keys to better suit their vocal range or that of the singer they are accompanying. A guitarist playing with other musicians who uses open tunings can now easily change keys while still keeping his or her guitar tuned in an open tuning without having to stop and re-tune. In addition, many bands have found that by using a quick-change key-change capo, they can get better harmonies, richer tones and more complex chords in their music. In fact, most modern day guitarists actually tune their guitars down half a step from standard tuning so that they can put

So, which guitar capo is better?

The answer for all of you who have asked is: it depends on the guitarist. If you have a fast changing style, then I would recommend you to get a quick change guitar capo, or key-change. For those who use traditional finger style or strumming techniques, go for the traditional capo.

The reason I prefer the key-change guitar capo over a traditional one is because of its speed and ease of use while playing. With the traditional guitar capo, you need to take it off and put it back on if you want to change the key. However, with the key-change guitar capo, you only need to push in a button and let it slide up or down to any fret that you wish. This saves me time and keeps my playing flow going without breaking my style.

A traditional capo is a bar that is clamped onto the neck of a guitar with a spring-loaded clamp and can be easily moved up and down the neck by hand. Traditional capos are available in several different types such as trigger, elastic, and lever-style. Traditional capos are generally less expensive than quick-change key change capos and tend to have fewer moving parts and are therefore more reliable. This reliability comes at a price though because changing keys or removing the capo from the guitar often requires two hands.

A quick-change key change capo is essentially a traditional capo with a mechanism that allows it to be moved up and down the fretboard with one hand. Quick-change key change capos have a large lever on their side that forces the clamp against the fretboard when pulled, allowing them to be removed from the fretboard quickly while maintaining an even pressure on all of the strings that makes them ideal for live performance situations. Quick-change key change capos are often more expensive than traditional capos and some people find that their larger size inhibits playability in certain circumstances.

I recently was asked to do a blog regarding the great guitar capo debate. I thought it would be a great idea so here we go!

I am going to start with a little history lesson. The first capo was made in 1833 by Camillo Camilli, an Italian violinist. It was a wooden bar with a mechanical action that attached to the fingerboard of the neck of the instrument. This device was patented as the “Capotasto”. Later in 1859, Adolph Gesswein patented an improved version of the Capotasto and called it the “Guitar Capotast

A guitar capo, or capo tasto in full length, is a device used on the neck of a stringed (typically fretted) instrument to shorten the playable length of the strings, hence raising the pitch.

Using a capo allows a guitarist to play in different keys using the same fingerings as playing open. The word derives from the Italian capotasto which means “the head of the fretboard”.

This is also known as “shortening” the strings. Capos are often used on guitars to raise (or lower) the pitch of open chords so that they can sing in a different key from the one an accompanist is singing (or playing) in.

In traditional music theory, chords may be moved diatonically up by two semitones by placing a capo on the second fret—although it should be noted that many modern acoustic guitars become difficult to play above this position.

Leave a Reply