Fret Buzz is KILLING Your Chops? Here’s How to Fix It

  • Post comments:0 Comments
  • Reading time:5 mins read

Fret Buzz is KILLING Your Chops? Here’s How to Fix It: Guide to fixing fret buzz through highly-rated products.

Here’s how to fix fret buzz and how to fix a guitar neck.

1. Learn How to Fix Fret Buzz with the Right Strings

2. Clean and Lubricate Your Guitar Fretboard with Lemon Oil

3. Use a Truss Rod Wrench to Adjust the Truss Rod

4. Learn How to Fix Fret Buzz by Using String Action Gauges

5. Use a File or Sandpaper to Deburr and Level Frets

6. Learn How to Fix Fret Buzz with a Professional Guitar Setup

You’ve been practicing hard, your fingers have calluses, you’re starting to form a band and jam with friends…

You think you’ve reached the point where you can confidently post videos of yourself playing on YouTube, but there’s one problem: when you play chords, every string vibrates even though you didn’t press it.

If this is happening, then fret buzz is killing your chops. I mean, think about it. How much would you enjoy listening to someone play an instrument that sounds like a buzzing bee? I wouldn’t.

If you want to fix it, there are many options out there. You could set up your guitar yourself by checking out these helpful tools or take it in for a setup at a shop. If neither of those seem convenient for you right away, then here are some highly rated products that might help you get started fixing fret buzz yourself:

Fret buzz is the bane of every guitar player’s existence. It’s that awful sound that comes out when you play an open string or a note at a higher fret and you hear an annoying buzz. This can ruin your entire playing experience and make you feel like throwing your guitar against the wall.

There are many different reasons behind why fret buzz occurs, but I’m going to cover all of those reasons in this article and the products that will fix them right away! I put together 12 of the best products that will help you fix fret buzz for good!

Let’s get started.

I’ve been a guitar teacher for the last 18 years and I have seen some pretty remarkable transformations when it comes to fret buzz.

Fret buzz is a common problem many new (and some not so new) guitarists experience. The thing is, it’s usually not the guitar’s fault.

It’s usually caused by the set up or how you play the guitar. The first thing you should do is to make sure your guitar has been set up properly by a local luthier or qualified technician. Once you have done that, it’s time to start digging in and cracking this nut on your own. Let me show you how to fix fret buzz once and for all in this quick guide!

Table of Contents

What is Fret Buzz?

Fret Buzz Causes: What Could be Causing Your Guitar to Buzz?

How To Fix Fret Buzz: 4 Practical Methods

String Height – Is It Too Low? Or Too High?

Action – How Low Can You Go?

Strings – Are You Using Heavy Gauge Strings?

Your Technique – Do You Play With A Light Touch?


Fret buzz is a common problem among guitarists, and it can be a frustrating sound to hear if you’re practicing.

However, there are ways to prevent it, and that’s what we’re going to cover in this post.

We’ll give you some of the best tips for stopping fret buzz, as well as show you the best products for fixing it.

In the interest of time, we’ve divided this post into three sections:

* Section 1: What causes fret buzz (and how to fix it)

* Section 2: Top 5 products for fixing fret buzz

* Section 3: Conclusion/what’s next?

We hope you find it useful!

Fret buzz is the bane of every guitar player’s existence, and while it can be difficult to fix, there are many ways to do so without completely changing your guitar. From home remedies, to professional luthier DIY guides, to full-fledged replacements, there is a fix out there for you.

It’s important to note that fret buzz is different than fret wear. If you’ve got a guitar that has been played for a long time, the frets will wear down and the guitar will need some TLC. That’s a project for another day, however.

Fret buzz is when you hear an obnoxious buzzing sound as soon as you press down on the strings in any position up the neck. This happens because your frets are not level with each other or with your strings, and you’re getting a dead note or rattle on open chords. Most often this can be fixed by simply checking your action (the height of your string from the fretboard) or by checking your truss rod (the tension rod inside the neck of your guitar). Some guitars don’t have truss rods, so check with your manufacturer before attempting any repairs on that front.

Leave a Reply