10 Things To Look for in A Solid State Amp: A blog about solid state amps. How to pick one and what to look for.
1) Tube Amps are great, but they can be delicate. They need more care and maintenance than a solid state amp. Tube amps will last you a while if you take care of them, but they are usually more expensive too. Tube amps sound more like the real thing than solid state amps.
2) Solid State amps have been around longer than tube amps, and they have come a long way since the early days. They are built to last and hold up against temperature changes and climate changes. Solid state amps are better for beginners because they don’t require as much maintenance as tube amps do.
3) Some Solid State amps have built in effects that you can use to create different tones from clean to distorted sounds. Many of these effects are digital instead of analog like tube amps are.
4) If you want to play music with a band or with friends you will want an amp that is loud enough for everyone else to hear you over the drums and other instruments that could be making noise at the same time as your amp. Many people prefer a louder sound rather than a softer sound when it
When shopping for a solid state amp, it is important to know what to look for. There are plenty of options out there and not every one is going to be exactly what you want. It’s important to weigh your options before purchasing an amp because they can be expensive. Here are 10 things to look for in a solid state amp:
1.Transistor Type – The type of transistor used in the output stage can make a big difference in the sound quality of an amp.
2.Filtering – If the amp has filtering, make sure it’s high quality and able to properly clean up the signal.
3.Power Transformer Size – Bigger transformers typically result in better performance, so check the specs on this if you can.
4.Power Supply Size – If there is no transformer, then check the specs on the power supply as it will affect performance just as much as a transformer would.
5.Tubes or Solid State – Solid state amps are generally preferable over tube amps because they are easier to maintain and have better tone control than tubes do when driving speakers directly with their output signals (which is usually how guitar speakers work). So if you’re looking for an amp that won’t break down on you at any moment, go with
As a guitar player, you’re constantly on the lookout for the perfect amp. You want something that’s going to give you all the sounds you need, that won’t break your back, and that will fit into your budget.
It’s a big decision and there are plenty of options out there in the amp world. There are tube amps, hybrid amps, solid state amps and modeling amps. The first thing you need to do is decide what type of amp is best for your playing style.
If you’re a metal guitarist or just like hard rock, then you’ll probably want a tube amp. If you prefer clean tones and some crunchy overdrive, then a solid state might be what you’re looking for.
In this post I’m going to look at 10 things to look for in a solid state amp if that’s what you’ve decided is best for your needs.
1) The Number Of Channels
This one is pretty obvious but it’s surprising how many performers don’t think about it before they buy an amp. If you need more than one channel then make sure the amp has enough! If you’re going to play clean songs and heavy songs, then make sure there’s a channel that can handle both. The number of channels goes hand
So, you’re in the market for a solid state amp. There’s a whole lot out there to choose from, so it can be pretty daunting trying to find an amp that’s right for you.
Here are some things to look for when you’re shopping around:
-First and foremost: build quality. How sturdy is it? Does it feel like it could last?
-How heavy is it? If this is going to be your main gigging amp (as opposed to something you just practice at home with), you’ll want something that can withstand the rigors of constant transport and setup/teardown. A good rule of thumb is if you can lift it easily, so can the wind.
-Does it have all the features you need to get the sounds you want? Do you need a lot of effects? Do you need a lot of EQ options? Or do you just want something simple with nice clean tones?
-What kind of power does it put out? This one’s especially important if you’re planning on gigging with this amp. Most small venues will be fine with 100 watts or less, but if you plan on playing larger places, make sure your amp can handle those bigger spaces.
1. The EQ – Even though it might seem like the most important thing, a good EQ is just a preference thing and shouldn’t be the number one reason to buy an amp. But it is still very important for a guitar player to have the ability to shape his tone. The EQ should be easy to use and give you enough options to get a decent sound.
2. Power Amp – This is where most of the power comes from in an amp and is probably more important than the preamp. It’s also pretty simple in SS amps so there isn’t much to look for here.
3. Preamp – This is where most of the distortion (if any) will come from in your amp and should be one of your main concerns when choosing an amp. The preamp quality varies greatly between amps, so definitely make sure that it gives you the sound that you are looking for.
4. Rectifier – In tube amps this can be found after the power amp and before the preamp which makes choosing an amp based on its rectifier a better idea because it will affect both sections of your amp, but in SS amps this can only be found after the preamp because there isn’t any tube power section (obviously). Although this
If you are researching your first solid state guitar amp, you may be confused as to how to pick one. This article will give you a few tips on how to make the right choice when it comes to a solid state amp for your guitar.
You want to start by analyzing what type of music you would like to play. If you are just starting out, you may not know this yet. But if you do, it will help you choose an amp that is suited for that style of music.
If you are looking for an amplifier that can cover all bases, then a multi-channel amplifier is what you want. You may need to spend more money on this type of guitar amp, but it will be worth it in the end if you have multiple uses for it.
To get the most out of your investment in a new guitar amp, make sure that you get one that has effects built into it. This will allow you to sound like any famous guitarist that has ever lived and make your own music sound better too.
If there are some particular sounds that are associated with your favorite bands or songs, then look for those specific settings on your new solid state guitar amp. This way, when those songs come on the radio or CD player, you can play
In the beginning there were two ways to amplify a guitar: 1) Put a microphone in front of your amp, play through the PA and hope for the best or 2) Use an acoustic guitar and hope for the best.
Eventually somebody decided to see if they could get more volume from their electric guitar by using a bigger speaker. Later someone else realized that you didn’t have to use air to move the speaker cone, you could use electricity. And so it began….
Most amps are now made up of three parts:
The pre-amp – which takes the instrument signal and makes it louder but not yet “amped”
The power-amp – which takes the signal from the pre-amp and amplifies it to drive the speakers
The speaker itself (which we won’t discuss here except to say that it is critical to sound quality)
The main difference between tube amps and solid state amps is how they amplify your signal. The pre-amp section of a tube amp uses actual vacuum tubes while solid state amps use transistors or ICs (integrated circuits) to do the same job. The power sections of both types of amps are pretty much identical in function, but again, tube amps use tubes and solid state amps use either trans